How to Turn on a Water Heater

Are you considering to install a new water heater? One thing you must evaluate is the risks when you are doing it by yourself. It is not a simple project, seriousness is needed to avoid making mistakes. Turning on a water heater by yourself can be a challenge unless you are an expert or a professional. It is not always a cheaper route. You need a proper background experience and training.

It sounds like it’s a simple thing to deal with. It involves some steps to be followed. Whether you are using a gas water heater or an electric water heater, you are capable of turning it on without calling a professional for help. If you are using an electric water heater, you need to look for the circuit breaker and turn it on. For a gas water heater, you need to light the pilot. These are the simple steps you should follow on how to turn on your water heater.

How to Turn on a Water Heater- Step by Step Guide

Step 1

Before you begin the process of turning your water heater on, it’s important to ensure that the circuit in to which the heater is connected is turned off. This is for your safety and it should not be overlooked. After turning off the circuit, it’s now okay to proceed. You will need to do the same if you’re using a gas water heater by ensuring the thermostat is off for safety purposes.

Step 2

In this second step, you need to close the open faucets. You might have been working on your water heater, hence, your hot water faucet might be open to let in air. Allowing air in ensures prevention of creating an airlock. For you to restore the system and turn on the water back, you will need to close those faucets.

Step 3

Here, turn the water heater tank’s cold water supply on. Allow it to refill. A serious damage can happen when the heating elements are turned back on with a tank which is partially filled. Filling the tank, replaces water that got lost while working on the tank.

Step 4

Now, remove the safety tag that locks out. It is a piece of tape that’s placed over the breaker to give a warning to anyone that gets near the panel to turn it on. This safety precaution prevents shocks and deaths.

Step 5

Finally, turn the water heater circuit breaker on. There is always no an indicator to alert you that the unit is on. Some sounds which you will hear, indicates that the heating elements have engaged. The water begins to heat. Within the next 30-60 minutes, your water should be hot. You can as well check the faucets to ensure that your water is getting hot.  

Reasons why your water heater might fail

You might turn on your water heater circuit and realize that you water isn’t getting warm. Here are various reasons why this might occur.

Your heating elements might have burnt out.

If you realize a consistent decrease in your water temperature, one of your heating elements might have burnt out. You are recommended to get in contact with a professional before its long so he/she can solve the problem.

Sediments might have built up.

Water heater tanks can get dirty like any other apparatus used at home. You need to clean up your tank always or add water softeners to reduce buildup of residues.

High water pressure

Too high pressure can be the cause of damage to your water heater and other appliances. If you notice a leak from the pipe on the side of your water heater, the issue might be excessive pressure.

Why you should call a professional/plumber

The most water heaters use gas, so the smallest mistakes made when installing can cause injury, property damage, added expenses, and even death. For these reasons, you need a plumber to show you how to do the job. Here are the reasons why you should hire a plumber

 A licensed and qualified plumber will ensure that your heater is permitted upon installation. Select a reputable company that will guarantee your warranty. Choose the one that has qualified professionals. If an issue happens during installation, your professional should address. With this

Risk of Explosion and Fire

Most of the water heaters use natural gas. When it comes to gas, a professional is needed to ensure that everything goes in the right direction. The person needed is the plumber. Dealing with natural gas means that you have to burn or furnace combustible fuel in order to heat your water. Remember that these fuels are highly flammable and small mistakes during installation may cause a serious explosion or even fire. It is not worth to put your family at risk or damage your property. Just call the plumber and the process of turning on your water heater will be perfect.

Carbon Monoxide Poisoning

For any gas burning water heaters, ventilation is vital. Enough airflow is a must. If it is inadequate, carbon monoxide builds up. Remember that carbon monoxide is a poisonous medical emergency. People who are exposed can be disadvantaged by this gas and have a risk of having permanent damage as well as death. The gas is odorless, meaning that if leakage happens it will be difficult to detect it. To avoid these mistakes that can have serious impacts when you want to learn on how to turn on or install your water heater, a plumber is needed. The plumbers know how to deal with natural gas.

Product knowledge

A person or online salesperson is typically not professional when it comes to water heating. Many of them may have good intentions, however, they can’t match the brand knowledge of a licensed and trained plumber. To satisfy your needs and for your family needs, just ask for a professional.

Peace of Mind

A licensed plumber is very vital when you are using or installing your water heater for the first time. When hiring one, you aren't just buying a good job done- you bring peace of mind to yourself and your family. It is good to know that you are secure from any property damage, hence a relief. Also, knowing that you are having a healthy life is important. Never joke with your life or family in the name of saving few dollars. Even it is worth it. Safety is needed at any cost. To ensure peace of mind just call a professional plumber.

Home Re-Sale Issues

There is a time you will need to sell or re-possess your home. During this time, a professional is needed. If you have installed this equipment by yourself, you need to pay some cash to get it permitted after it is inspected. Failure to pass the inspection requirements, a repair is needed and even re-installation. For this reason, there is a probability that you might pay twice. To avoid inconvenience and stress when selling your home, just call a professional.


Join The Discussion