How to install a shower head – Step by Step Instruction

How do you install a shower head? Installing a shower head is one of the simplest, least expensive ways to revitalize your shower. Also, it is something that even apartment residents and tenants can do to personalize the bathroom without damaging walls or other fixtures!

 Replacing old heads with low-flow models is one of the best ways to save water. And for people with sensitive skin or airways, replacing a former shower head with a filtered model can even help to solve health problems.


With so many great reasons to dig your dull, outdated, or just inefficient shower head, do not worry about the uncertainty on how to install a new one! Here are the steps you need to follow if you won't know how to install a shower head.

Step 1

Use a tire/strap wrench, pliers, or half a wrench to remove your old shower head. Then, turn the connection nut anticlockwise to change or remove. If you need to prevent cosmetic damage to the old shower head, using a tire wrench since it is the best method. If a belt wrench is not available, you can use a cloth between the shower head connection nut and the pliers. This will help you to prevent scratches on the finish.

Step 2

Here is the second step. Clean the threads on your bathroom shower arm. In most cases, there may be a remainder of the sealing tape or mineral deposits on the arm that can be cleaned using the mild soap and water or an old toothbrush. Our research shows that a paper clip can be useful when removing old PTFE tape from threads.

Step 3

You need to pay more attention to this step. Now that the wires contained in the shower arm are clean, it is easy to apply new PTFE tape. Just use about four-six wraps around these wires; turn tightly and slowly in a clockwise direction. Using your fingers, carefully press this tape into the cables.

Step 4

Now it’s time to remove your latest version of shower head from the packaging. Before anything else, ensure to check the contents. Some of these new showerheads come with the rubber ring, and you have to install it.

If your new shower head is not supplied with the washing machine, you may skip this step. However, if it does come with the rubber ring, put it in your shower arm connection nut, then push it flat.

Step 5

This is a simple step that you should perform well. Start laying your shower head on the shower arm. Do it slowly to avoid crossing wires; then, you need to tighten your hands as much as possible.

Use your tire wrench to tighten the nut at a quarter turn. This is must be done keenly. Note that you are advised not to stretch too tightly. This can damage the threads. It can also tear the connecting nut of your shower head.

Step 6

Now you are starting to have hope. After this step, you are now ready to use your new showerhead to suit your needs. Turn on the water and do not forget to check for leaks. This is very important as it will alert you whether your shower will work efficiently. If there are some leakages from the joint, switch off the water and try to tighten the nut again.

Step 7

This is the final step when you are installing a shower head. Again, switch on the water and recheck more about the leaks. If you notice that there are no leaks, you have a reason to smile. Here we say, congratulations on your excellent work!

Nevertheless, if there are signs of leaking, then you should know that there is a problem with the connection, check if the wires are not crossed. Unscrew your shower head and remove the tape and reinstall it. Add a few extra wraps. Replace the shower head by following steps five and six keenly.

Reasons for installing a low-flow shower head

You need to enjoy a proper shower every day of your life. With this, your body will feel more relaxed. A good shower will also increase the mood of your body. There are numerous reasons why you not only replace your item but also install a low-flow showerhead in your bathroom.

Consider a lower output, such as reducing environmental considerations, being cost-effective as well as obtaining options under the shower that you probably will not enjoy your modern amenities.

Environmentally Friendly

When choosing, make sure you make the right decision. The best-known aspect of switching to a showerhead with a low flow rate is that it is an environmentally conscious decision. This allows you to regularly carry out an activity that is known for wasting water and approaching it with environmental responsibility.

Water Conservation

To many people, this may seem like just a distinct advantage, but you may be surprised at how much water is being conserved. By switching to low-flow, you can save about 10,000 gallons of water per annum. In a family of about four, it means that nearly 60,000 gallons of water are saved each year.

Saves Energy

If you use little water, less power/energy, then you are assured of saving your money and bills. Let the saved energy go to the heating of the reserves. This means less activity for your boiler and less electricity that keeps it running at a high level.

This type of showerhead will deliver perfect services to your home. Because of less energy used, the use of electricity will therefore decrease. This is the reason you should purchase and install it.

Temperature and Volume Control

Having a temperature control means no more running water while trying to get it to that perfect spot. Instead, it keeps the stream a trickle while you wait for the water to warm up or try to balance the hot and cold to your favorite. You will also be able to regulate the amount of water being supplied hence saving energy and water.

Economical

Even if environmental conservation is not high on your priority list, saving money is probably the case. With a shower head with a low flow rate, you can save money in different ways.

Your water bill will decrease significantly, in some cases a reduction of almost half of the amount. If you are yearning to increase your initial investment, then you need to get additional options. With this, you can quickly maximize your savings.

Your energy bill is another area where you can see a rapid change in the amount of money you have to keep in your wallet. If you use less water, you can make your boiler work a little less hard. It also costs less energy to reheat the tank when you can shower without depleting your reserves.

These savings will be even more significant if you opt for the temperature control function so that your tank does not have to waste hot water while you wait before finding the right temperature before boarding.

Do not let the fear of a less satisfying shower or initial costs cause you to make adjustments. Examine the available options and choose the low-flow showerhead that suits you, knowing that you have an ecological impact, as well as in your wallet.

You may read also

Join The Discussion